[SML] Microvision (and first generation Expression) video connection

[Ole Stigaard]

What about adding something like this:
http://www.ebay.com/bhp/cga-to-vga

Ole

2014-11-17 18:32 GMT+01:00 mburris via Stagecraft <stagecraft at theatrical.net
>:

> I am trying to get video signal out of an ETC Microvision FX console.
>
> My last CGA monitor died several years back, so I am pulling the signal
> thru the BNC video connection to a tiny little auto headrest monitor. It is
> inelegant but functional. However, it appears that the BNC connection is a
> little loose and connection is maintained by a strategically placed rubber
> band.
>
> This may be a long shot, but is there any chance that I can convert any of
> the 9 pin CGA output to drive the tiny video monitor?
>
> The DB-9 pinout is
>
> * Pinout*
>
> 1 Common (AC ground)
>
> 2 Common (AC ground)
>
> 3 Red
>
> 4 Green
>
> 5 Blue
>
> 6 Intensity (green)
>
> 7 Monochrome video
>
> 8 HSync
>
> 9 VSync(60Hz)
>
>
>
> Or is it all just a pipe dream?
>
>
>
> Thanks in advance.
>
>
>
> Michael Jon Burris
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20141118/bf51ea43/attachment.html>