[SML] Dimmers won't turn off

[nathan best]

Problem solved (sorta). I called ETC Support, but while I was hold I
decided to look into the Unison control. In zones, the zones that
correspond to the dimmers that were on were all set at 50%. Just turned
them down to 0% and everything was fine. No idea what caused it, but hey!
Problem solved.

On Thu, Aug 27, 2015 at 12:15 PM, Paul Marsland via Stagecraft <
stagecraft at theatrical.net> wrote:

> Or if running through a Unison control, you need to "Clear Local
> Zones" twice (if memory serves).
>
> A call to ETC tech service will do you wonders - 800-688-4116
> Paul Marsland
> +1 (919) 239-0551
>
>
> On Thu, Aug 27, 2015 at 12:13 PM, Paul Marsland <pmarsland at gmail.com>
> wrote:
> > Try the 'reset' button on each CEM
> > Paul Marsland
> > +1 (919) 239-0551
> >
> >
> > On Thu, Aug 27, 2015 at 12:11 PM, nathan best via Stagecraft
> > <stagecraft at theatrical.net> wrote:
> >> I had a power outage recently and now certain lights won't turn off. My
> >> Sensor+ dimmer rack says those dimmers are receiving signal, but I'm not
> >> sending anything. I've even disconnected the DMX cable. I get no errors
> on
> >> the rack. Any thoughts?
> >>
> >> Nathan
> >>
> >>
> >> ____________________________________________________________
> >> For list information see <http://stagecraft.theprices.net/>
> >> Stagecraft mailing list
> >> Stagecraft at theatrical.net
> >> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20150827/657731fd/attachment.html>