[SML] Networking - light board and sound board on same WAP?

[Steven Hood]

Theoretically, yes, so long as both host machines have different IP 
addresses. Assuming, of course, that your remote devices get the right 
addresses, port numbers required to the proper hosts, and such. We have 1 
WAP that serves two different Crestron systems in the same room. Long 
story. You don't wanna know, but we're fixing that problem.
Steven R Hood
310.756.3555



On July 30, 2015 9:16:55 PM Ben Hain via Stagecraft 
<stagecraft at theatrical.net> wrote:

> Hi‹
>
> I use a Wireless Access Point on my light board in order to utilize the
> iRFR.
>
> Now we got a soundboard that can utilize an iPad remote. (Midas M32R)
>
> Can both be connected to the same Wireless Access point?
>
> I don¹t utilize the remotes for performance, just tech.
>
> (I didn¹t use a router because I don¹t know enough about networking to
> make it work.
> This was simpler.)
>
>
> Thanks‹
>
> Ben Hain
> Rochester Repertory Theatre
> Rochester MN
>
>
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net