[SML] Portable lift in trap room?

[Mike Katz]

If you are only going 14' maybe look at the possibility of outriggers like
on a genie so you do not need to bolt it down at all. Also since the room
is 20x20 you could put in pipe US -DS and SL-SR and clamp the lift into
place on the pipes. OR  Put unistrut in the floor and clamp to it.
I like the flexibility of these approaches if they really do not want holes
in the floor.
Mike

Michael Katz
narishkup at gmail.com
C: 857.383.0020

On Fri, Mar 6, 2015 at 3:03 PM, Tom Marhenke via Stagecraft <
stagecraft at theatrical.net> wrote:

>     Curious how others have solved this problem, new building with lots of
> beautiful features including a 20’ x 20’ trap room. The height from trap
> floor to stage deck is about 14’-0”. Trying to figure out an OSHA approved
> lift that is somewhat portable, portable in that it can be moved around the
> trap room and bolted to the floor. Physical Plant wants minimal holes in
> floor and would like a plot so holes can be reused. There is some money in
> the budget. Thoughts?
>     Thanks,
>
>     Tom Marhenke
>     Technical Director, Theatre
>     Hamilton College
>     315-859-4869
>     Tmarhenk at hamilton.edu
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20150306/81584179/attachment.html>