[SML] Macbook hdcp question

[Alex Donkle]

HDfury boxes have also been used to get around this issue.

On Wed, Sep 23, 2015 at 5:15 PM, slunetta via Stagecraft
<stagecraft at theatrical.net> wrote:
> See if you can IP into the Kramer and tell that port to disable HDCP. All
> Mac Computers have it enabled and you have to disable it with an external
> box. You may have content issues if you do this.
>
> Sam Lunetta
>
>
>
> Sent from my Verizon Wireless 4G LTE smartphone
> -------- Original message --------
> From: Steven Hood via Stagecraft <stagecraft at theatrical.net>
> Date: 9/23/2015 13:24 (GMT-05:00)
> To: Stagecraft <stagecraft at theatrical.net>
> Cc: Steven Hood <shood_td at yahoo.com>
> Subject: [SML] Macbook hdcp question
>
> New MacBook Pro. Running hdmi through Kramer switcher. We're running the
> hdmi from the switcher to the projector via cat6 (works fine). Using VGA
> from switcher to feed confidence monitor. This all worked beautifully from
> the Dell we used before. Tried using a Mac, and the VGA didn't get signal.
> My hunch says HDCP is to blame, but I didn't see a way to disable that...
> Thoughts?
> TIA,
>
> Steven R Hood
> 310.756.3555
>
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net