[SML] Recall of Philips 60W PAR 16 120V Halogen Bulbs, screw in base

[Dan Sheehan]

Confirmed my PAR38's that dropped their front lens disks were 250W SP's.
(Never ran long at high power, doubt overheating was a factor)
Only mark that might indicate source is the boldtype word "PLATINUM".


On Fri, Feb 26, 2016 at 12:15 PM, Dan Sheehan <dsheehan.sml at gmail.com>
wrote:

> I've had the front disk (lens) fall off a couple of PAR38's.
> Relector shell intact, lens disk intact, lamp still worked.
> but separated cleanly where they join.
> Might have been 250W units (!), don't recall brand name.
>
> On Fri, Feb 26, 2016 at 10:06 AM, Scott C. Parker via Stagecraft <
> stagecraft at theatrical.net> wrote:
>
>> More for the home market, but....
>>
>>
>> http://www.usa.philips.com/c-w/support-home/recall/recall-halogen-bulbs.html
>> --
>> Thanks,
>> Scott
>>
>> Scott C. Parker
>> Lighting Designer http://scpld.com/ Studio 212-533-3430  Cell
>> 718-757-6661
>> http://twitter.com/stageseminars
>> https://www.linkedin.com/in/lightingdesigner
>> USA829, IES, PLASA, USITT, ETCP certified Rigger & Electrician
>>
>> ____________________________________________________________
>> For list information see <http://stagecraft.theprices.net/>
>> Stagecraft mailing list
>> Stagecraft at theatrical.net
>> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>>
>
>
>
> --
> ...Dan Sheehan
> Fixer of things that break
>
>


-- 
...Dan Sheehan
Fixer of things that break
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160301/3cb409ba/attachment.html>