[SML] Chain Hoist connectors

Wed Sep 21 00:20:42 UTC 2016

Two separate connections: one for power, one for control. 4 pin is control. 

Kristi R-C

> On Sep 20, 2016, at 7:13 PM, Joe Golden via Stagecraft <stagecraft at theatrical.net> wrote:
> 
> I got into a discussion with a friend about the type of connector for a pickle connection to a hoist.  The way I understand the various rules, the connector has to have a ground and be rated for 120v.  So this would eliminate an XLR connector, correct?  Even if they used a 4 pin, it isn't UL listed for 120v IIRC.
>  
> Joe
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160920/87bc41c1/attachment.html>