[SML] Grid Loc Pipe Clamp Question

[Michael Powers]

> Tom Grabowski  wrote:

> grid loc pipe clamps.  My question is about the 4 bolts that hold the clamp shells together.  Is there any kind of specifications as to how tight the nylock nuts should be?

Nylock nuts are irrelevant.  Bolt diameter thread and type, determines proper torque.  IIRC the grid lock clamps use 3/8"-16 course bolts so torque should be about 23 ft/lbs.  

Michael Powers
USMC '65-'69
ETCP Rigger #820 (Ret'd)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20170126/6900f8f5/attachment.html>