[SML] Crown PCC160

[Bruce]

>
> Anyone know, or have a referenced to the pin configuration on the
>> PCC160 T3AF to XLR-M cables that the '160 uses is?
>
>
>
> If I read the schematic right, pin 1 on the TA3F connector is Shield, pin 2
> is hot, and pin 3 is ground. If you have a need for unbalanced operation
> you can short pins 1 and 3 together.
>

You could use a meter to check continuity on the current cables....

:Bruce
--
Itinerant stagehand and fixer of things