[SML] Alternatives to LittLites for light at the boards?

[Scott C. Parker]

I wonder if you could use some spring steel wire and heat shrink as a
supporting splint of some sort. Even just the heat shrink would add some
support.

On Sun, Dec 2, 2018 at 4:58 PM Jon Ares via Stagecraft <
stagecraft at theatrical.net> wrote:

> Howdy folks....
>
> I've got some LittLites (XLR board-mounted) that are "tired."  (Can't
> hold their heads up anymore.)  Replacements are freakishly expensive
> in this day-and-age, so I'm open to alternatives... don't need to be
> XLR-mounted... but they need to be low-light.  Most small desk lamps
> (LED-based) are way too bright, and/or don't dim low enough.... I
> figured some folk out there have put some small lamps on their
> production tables/booths that are good alternatives to LittLites....
> right?
>
>  - Jon
>
> --
> Jon Ares
> www.arescreative.com
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>


-- 
Thanks,
Scott

Scott C. Parker
Lighting Designer http://scpld.com/ Studio 212-533-3430  Cell 718-757-6661
http://twitter.com/stageseminars
https://www.linkedin.com/in/lightingdesigner
USA829, IES, PLASA, USITT, ETCP certified Rigger & Electrician
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20181205/5318f85d/attachment.html>