[SML] Mounting a projector

[Pietrie, Joe]

On Tue, Apr 23, 2019 at 7:23 AM Stephen Rees via Stagecraft <
stagecraft at theatrical.net> wrote:

> The house TD at the Fredonia Opera House just received a new video
> projector that is significantly larger than the former unit.  The former
> had a  platform suspended from and FOH pipe by a yoke with two C-clamps.
>
> The new projector weighs about 50 pounds, is larger than the exiting
> platform and comes with hardware that seems designed for mounting to a
> piece of 1.5" pipe in the projector itself.
>
> The question is, could this projector be suspended by a C-Clamp fitted in
> a hole bored in a 1.5" pipe cap that is threaded on to a piece of pipe and
> then attached to the projector? The yoke bolt would be lock-nutted and
> thread-locked to prevent loosening.
>
> In the past, I've seen side arms for lighting mounted this way and they
> seemed secure.
>
> Any thoughts on this would be much appreciated - and soon. He wants to
> mount the projector this week if possible.
>
> Many TIA.
> Steve
> Stephen E. Rees, Treasurer - Revitalize Dunkirk
> Professor Emeritus of Theatre
> CCE-CC Master Gardener Volunteer
> 716.366.0505 Home
> 716.680.1565 Mobile
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-- 
Sent from Joe Pietrie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20190423/e5cc493c/attachment.html>