[SML] Clear Epoxy for Wood recommendations

[Jacob Blumberg]

Bubbles. Sorry I just saw that typo.
Jacob

On Tue, Feb 12, 2019 at 16:50 Jacob Blumberg via Stagecraft <
stagecraft at theatrical.net> wrote:

> There’s stuff called total boat epoxy, that I’ve seen dry very clear. You
> will also want a heat gun or blow torch to take the bumbles out. It takes
> some time though because you have to do multiple pours for thick parts.
>
> Hope this helps,
> Jacob
>
> On Tue, Feb 12, 2019 at 15:42 Jeffrey Kanyuck via Stagecraft <
> stagecraft at theatrical.net> wrote:
>
>> Hello,
>>
>>     I’m looking for recommendations on a very clear drying epoxy glue for
>> wood.
>>
>>
>>
>> Use is going to be on some set dressing pieces but, very close to the
>> audience.
>>
>> Needs to be able to hold some weight together, about 20lbs. of material
>> past a cantilever. NOT over anyone’s heads.
>>
>>
>>
>>
>>
>> Jeffrey Kanyuck
>>
>> Technical Director
>>
>> Harford Community College
>>
>>
>> ____________________________________________________________
>> For list information see <http://stagecraft.theprices.net/>
>> Stagecraft mailing list
>> Stagecraft at theatrical.net
>> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20190212/a44b1c93/attachment.html>