[SML] Floor paint and/or sealer

[Bill Conner]

Check the ANSI standard. I think that class 1 is the "best" and 5 the
"worst", but won't swear by it.


There's a fellow at Weekes Forest Products that knows a lot about hardboard
and plyron. Try to find him if you want detail and history. They can also
supply about any panel product you need.

On Sun, Jun 9, 2019, 1:24 PM George Davidson via Stagecraft <
stagecraft at theatrical.net> wrote:

> Its not the paint
>
> i was stuck with a low grade masonite type floor and its been years of
> touchups from any and all tape pulling up layers of the hardboard, even
> painters tape can cause pullups
>
> I have since learned that what you want is ANSI grade 4 or 5 tempered
> hardboard, this will be a special order item, or one of the alternatives
> like plyron or polyonix or stagelam
>
> IF you do go with one of the alternatives, make sure to seal the floor
> first with a good oil based primer as tough prime and other latex paints
> dont stick as the first coat
>
> George
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20190609/c6d3b9eb/attachment.html>