[SML] Gluing printed vinyl onto scenery....

[Jerry Durand]

If you need tape that can be repositioned a couple of times be sure the
vendor knows that.  I specified some 3M tape for a customer's front
panel, it was one touch and that's never coming off.

On 9/12/19 4:52 PM, Maia Robbins-Zust via Stagecraft wrote:
> I've used double stick tape quite successfully for this. Not the stuff
> at your local hardware store, you need to source a really good tape.
> I've found several online vendor's that cater to the sign making
> trade, that had what was needed.
>
> The tape allows one or two retry's before it loses it's stickiness,
> and if it goes real bad, you can rip up the tape and do over easily.
>
> With designs that have wiggly edges, you put the tape down and then
> trim away the parts not needed.
>
> Probably wouldn't hold up for a touring production, but worked great
> for a couple week run.  And if edges started peeling up a bit, it was
> easy to add a bit more tape under the vinyl.
>
>
> Maia Robbins-Zust 
>

-- 
Jerry Durand, Durand Interstellar, Inc.
www.DurandInterstellar.com
tel: +1 408 356-3886
@DurandInterstel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20190912/d2f9d968/attachment.html>