[SML] [EXTERNAL] Nimbus Wiring Diagram

[Jonathan Zitelman]

Thanks for the wiring diagram, I was able to verify all connections were
correct.

I'm going to swap out the heating coil.  One tests at 9 ohms and the other
at 13 ohms, so maybe the added resistance is burning out the relays...
Going to try to do a bit more testing...

-Jonathan

On Fri, Jul 2, 2021 at 11:00 AM Jeffrey Kanyuck via Stagecraft <
stagecraft at theatrical.net> wrote:

> Ok, Then to me that means that particular element is bad.
> Unless I am missing something.
>
>
> ------------------------------
> *From:* Stagecraft <stagecraft-bounces at theatrical.net> on behalf of
> Jonathan Zitelman via Stagecraft <stagecraft at theatrical.net>
> *Sent:* Thursday, July 1, 2021 5:38 PM
> *To:* Stagecraft Mailing List <stagecraft at theatrical.net>
> *Cc:* Jonathan Zitelman <jzstagecraft at gmail.com>
> *Subject:* Re: [SML] [EXTERNAL] Nimbus Wiring Diagram
>
> Please use caution: This email was generated outside of HCC.
>
> Yes, I ran continuity on both and switched the wires between them.  Still
> no luck.  :-(
>
> -JZ
>
> On Thu, Jul 1, 2021 at 4:02 PM Jeffrey Kanyuck via Stagecraft <
> stagecraft at theatrical.net> wrote:
>
> Have you tried putting the first heating element on the second heating
> elements circuit to see if it actually heats up?
>
>
> ------------------------------
> *From:* Stagecraft <stagecraft-bounces at theatrical.net> on behalf of
> Jonathan Zitelman via Stagecraft <stagecraft at theatrical.net>
> *Sent:* Thursday, July 1, 2021 4:36 PM
> *To:* Stagecraft <stagecraft at theatrical.net>
> *Cc:* Jonathan Zitelman <jzstagecraft at gmail.com>
> *Subject:* [EXTERNAL] [SML] Nimbus Wiring Diagram
>
> Please use caution: This email was generated outside of HCC.
>
> I'm running into issues troubleshooting a Chuavet Nimbus.  It was
> purchased second hand and the primary heating element doesn't seem to
> work.  Upon inspection there was some damage on the circuit board.  Despite
> installing a replacement controller board, the primary element still will
> not heat up.  The second element heats up no problem when connected.
>
> I have traced continuity across all connections and cannot find any
> issues.  All the connections on the circuit board appear to be correct when
> comparing the two elements (all cables were marked when swapping the
> boards), but I am wondering if the previous owner may have tried to do a
> repair and switched a wire or two.
>
> It seems to be a simple enough circuit, but I was curious if anyone has a
> wiring diagram available just so I can verify the connections.
>
> Ford, is this something that Chauvet makes available by chance?
>
> Thanks in advance,
> Jonathan
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20210702/18a60ec8/attachment.html>