[SML] Floors again

[Bill Conner]

Well, fwiw, my stage floor top down is 3/4" plyron, 1 1/8" ply  2x4
sleepers 24" on center, and 3/4" neoprene. I switched from 1/2" plyron
years ago when I started putting stage edge warning lights in, which are a
1/2" deep.  Needed 3/4" top to route 1/2" deep.

On Sat, Oct 5, 2024, 11:29 AM Duncan Mahoney via Stagecraft <
stagecraft at theatrical.net> wrote:

> 3 of our theaters have sprung plywood floors with a top layer of MDF.  I
> prefer a top layer thicker than 1/4" if the thickness can be accommodated.
> Performance has been good, we have only had to replace floors after floods.
>
> I would not want a plywood floor without a top layer of something that
> would not splinter.
>
> Duncan Mahoney
> Technical Director
> Professor of Theater Practice in Production
> USC School of Dramatic Arts
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20241005/f5f04a81/attachment.html>