<div dir="ltr">Hello all, <div><br></div><div>      I'm using a rented Lightronics xc 40 4 channel dimmer pack. Each channel is powering a 3amp 12v power supply which in turn powers between 5-10 ft of LED tape at 4.8 watts per meter. The channels are all doing an (unwanted) repetitious flash more or less in sequence even when no power it applied to the channel. The CnFG is set for 5 pin dmx, so I'm not running chase sequence. I've changed the Dimmer curves to LED1 and LED 2, that didn't help. The manual doesn't say that I need a DMX terminator. (should it?) </div><div>There's no pulsing of the lights when the channels are up on the board.</div><div><br></div><div>Many Thanks in advance for any suggestions you may have. </div><div><br></div><div>Matt </div><div><br></div><div>Matthew Whiton </div><div>Production Manager </div><div>Lyric Stage Company of Boston </div></div>