<div dir="ltr">The house TD at the Fredonia Opera House just received a new video projector that is significantly larger than the former unit.  The former had a  platform suspended from and FOH pipe by a yoke with two C-clamps.<div><br></div><div>The new projector weighs about 50 pounds, is larger than the exiting platform and comes with hardware that seems designed for mounting to a piece of 1.5" pipe in the projector itself.  </div><div><br></div><div>The question is, could this projector be suspended by a C-Clamp fitted in a hole bored in a 1.5" pipe cap that is threaded on to a piece of pipe and then attached to the projector? The yoke bolt would be lock-nutted and thread-locked to prevent loosening.</div><div><br></div><div>In the past, I've seen side arms for lighting mounted this way and they seemed secure.</div><div><br></div><div>Any thoughts on this would be much appreciated - and soon. He wants to mount the projector this week if possible.</div><div><br></div><div>Many TIA.</div><div>Steve <br clear="all"><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div>Stephen E. Rees, Treasurer - Revitalize Dunkirk</div><div dir="ltr">Professor Emeritus of Theatre</div><div dir="ltr">CCE-CC Master Gardener Volunteer<br><div>716.366.0505 Home</div><div>716.680.1565 Mobile</div><div><br></div></div></div></div></div></div></div></div></div></div></div></div></div>