[SML] Bottom hanger irons

[PJ Veltri]

I've been using theatricalhardware.com shackle plates on the bottom rail or
near the inside bottom  of the  stile lately. This usually involves a hole
in the top rail for the stinger (and thimble) to pass through.

PJ
On Sep 14, 2014 7:48 PM, "Steven Hood via Stagecraft" <
stagecraft at theatrical.net> wrote:

>  My favorite way to fly those is a threaded 1/4" plate embedded beneath
> the 1x bottom rail and forged eye-bolt through the rail. Or a t-nut into a
> 5/4 or 2x bottom rail. I've also done top hanging irons bolted to the
> inside of the stiles, reinforced the bottom corners with flat corner irons.
>
> Other ideas or ways folks have done it? Please share. I have a few of
> these to do later this season...
> Steven R Hood
> 310.756.3555
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20140914/c4853154/attachment.html>