[SML] Hanging plexi panels

[Brian Munroe]

Do you have the capability to fabricate a metal bracket?  I'm thinking a u-shaped piece of steel sandwiching the 1x, thru bolted, and with an eye pad welded on top.  The u shaped steel could be fabricated from other shapes (flat bar, angle iron, etc).

Brian Munroe. 

Sent from a rather small device with big fingers

> On Jun 3, 2015, at 8:51 PM, Bill Schaffell via Stagecraft <stagecraft at theatrical.net> wrote:
> 
> I will be sandwiching some 1/4" plexi sheets (7' h x 15'w) between two pieces of 1x6 x15'. This needs to hang from chain motors. Other than making chain loops that are bolted through the three layers (for shackles to attach to) is there another way I should consider that will keep the panel hanging perpendicular to the stage floor?
> 
> Thanks,
> Bill
> -- 
> Bill Schaffell
> 
> Bill Schaffell
> 
> WJS Studios
> 
> 714-808-9506
> 
> www.wjsStudios.com <http://www.wjsStudios.com>
> 
> <http://www.AeroPoleSystem.com>
> 
> 
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net