[SML] Hanging plexi panels

[Jon Lagerquist]

We often use a "Y" cable, with three eyes, for this type of application. I
would consider a piece of threaded rod so you can set the compression on
the plexi separate from the securing of the cable or chain.

--
Jon Lagerquist
--

On Wed, Jun 3, 2015 at 5:51 PM, Bill Schaffell via Stagecraft <
stagecraft at theatrical.net> wrote:

> I will be sandwiching some 1/4" plexi sheets (7' h x 15'w) between two
> pieces of 1x6 x15'. This needs to hang from chain motors. Other than making
> chain loops that are bolted through the three layers (for shackles to
> attach to) is there another way I should consider that will keep the panel
> hanging perpendicular to the stage floor?
>
> Thanks,
> Bill
> --
> Bill Schaffell
>
> Bill Schaffell
>
> WJS Studios
>
> 714-808-9506
>
> www.wjsStudios.com <http://www.wjsStudios.com>
>
> <http://www.AeroPoleSystem.com>
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20150603/c43a42b3/attachment.html>