[SML] tripping

[theater at ericminton.biz]

Aloha

the Company I make their catalog has a clamp that is perfect for what 
you want to do. It is on page 47 of the catalog. Their Web page is at 
www.ihplabor.com.

Hope this helps
Eric


On 2015-09-15 09:53, Kim Hartshorn via Stagecraft wrote:
> The bottom batten does not have to be a pipe in the pipe sleeve.  You
> can use a wooden sandwich batten.  Two 1x4 battens that sandwich the
> bottom of the drop.  If you rabbet a slot down the middle of each
> batten you can trap a rope in the bottom of the pipe sleeve in the
> rabbet and that will ensure that the batten does not slip out.  You
> can then attach the wooden batten to your trip batten by drilling
> through the bottom half of the batten that is clear of the drop.
> Ideally when the drop is in the wood batten will lie flat on the
> floor.
> 
> Round the edges of the batten over so it does not cut into the drop.
> 
> ---------------------------------------------------------------------------------
> 
> Kim Hartshorn
> 
> 
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net