[SML] Relays vs. Traditional Circuit Breakers for LED Power.

Kristi R-C misswisc at aol.com
Thu Aug 11 03:28:20 UTC 2016


I suspect your suppliers are suggesting "breaker" as opposed to "dimmers" for the LED fixtures and the confusion is in the terminology being used not the location or type of the breakers themselves. 

Kristi R-C



---- Original Message ----
From: tech dept via Stagecraft <stagecraft at theatrical.net>
To: Stagecraft Mailing List <stagecraft at theatrical.net>
Cc: tech dept <tech.dept at inbox.com>
Sent: Wed, Aug 10, 2016 10:03 pm
Subject: Re: [SML] Relays vs. Traditional Circuit Breakers for LED Power.

It sounds to me like someone is trying to sell you a very exotic bill of goods that you really don't need and could do much cheaper and probably have better reliability a more conventional way. (Standard regular circuit breakers and a relay pack (though I really see no need for the extra step of a relay pack.) I assume all the fixtures are standard theatrical brands and DMX controlled. A nice large 'company switch' (AKA Bulldog) preceding the permanent breaker panel Is all the good night switching I would want for the breakers.
An inspector would really raise an eyebrow if you were regularly switching on and off the breaker for non-fault reasons.

> -----Original Message-----
> From: stagecraft at theatrical.net
> Sent: Wed, 10 Aug 2016 21:45:03 -0500
> To: stagecraft at theatrical.net
> Subject: [SML] Relays vs. Traditional Circuit Breakers for LED Power.
> 
> We're in the midst of looking at upgrading a significant portion of
> our stage lighitng to LED in the near future.  As part of the
> exploration, vendors have suggested the addition/installation of relay
> controlled breakers to supply power to the various positions.  One of
> our own University electricians asked me "why do you have to have
> relays, couldn't you just flip the breakers?" I didn't have an answer
> that I felt good about giving him, so I'm here now asking the
> collective -
> 
> Is there an absolute "must have" reason for the remote relays,
> especially given that we're looking at full rack replacement, and the
> installation of a new control network anyway? Access to the panel
> would be very convenient; it's not likely to be placed in a
> hard-to-reach spot. I'd really like to have a reason other than "the
> recommendation of the vendor is to use this."
> 
> Thanks in advance for your collective wisdom.
> 
> -RG
> 
> --
> Rob Graham
> photonguide at gmail.com
> 
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net

____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop!
Check it out at http://www.inbox.com/marineaquarium



____________________________________________________________
For list information see <http://stagecraft.theprices.net/>
Stagecraft mailing list
Stagecraft at theatrical.net
http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160810/dda7d21c/attachment.html>


More information about the Stagecraft mailing list