[SML] Caster Storage?

[ani]

I once worked in a shop where casters were stored similarly to wineglasses
in a bar: strips of ply screwed under a shelf to provide guides, with
caster plates slipping in and wheels hanging.  Easy to see, easy to pull.

On Sat, Jul 9, 2016 at 8:59 AM gbierly via Stagecraft <
stagecraft at theatrical.net> wrote:

>
> On Jul 7, 2016, at 12:47 PM, Tom Hackman via Stagecraft <
> stagecraft at theatrical.net> wrote:
>
> > I am thinking about building 'tip-out' bins under a work table in the
> shop. It keeps them out of the way but still close to where they will be
> needed.
>
> I have two bins approx. 20"x30" that fit in bays under my radial arm saw
> table.  They both have dividers that partition into six compartments.  The
> one has a 20"x15" shallow bin that slides over the top and lifts out for
> smaller wheel storage with the larger ones underneath.  I like the idea of
> the tip out bins as long as they use the full depth of the work table.
>
> Greg Bierly
> Performing Arts Center Manager
> Hempfield High School
>
>
>
>
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-- 

Anna B. Labykina

Technical Director

BOSTON LYRIC OPERA

11 Avenue de Lafayette, Boston, MA 02111-1736

ALabykina at blo.org | o 617.542.4912 x259 | m 617.388.5656
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160714/6b36666d/attachment.html>