[SML] PVC socket cap

[Patrick McCreary]

You might try to find a brass fitting long enough to put a washer on 
both sides of the threaded hole to increase the strength of the joint -  
maybe an automotive fitting?

Patrick

On 3/15/2016 3:12 PM, Jerry Durand via Stagecraft wrote:
>
> What are the odds that I can drill & tap 2" white PVC socket caps to 
> put a 1/4" MPT fitting in and have them reliably hold city water pressure?
>
> I was wondering about screwing on a 1/4" coupling on the inside of the 
> fitting and gluing it in place before attaching to the large pipe.
>
> I have to do a bunch so hopefully this works.
>
> Alternately, anyone seen 2" slip to 1/4" FPT adapters?  My sources 
> seem a bit scarce for that.
>
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160316/75ae2f00/attachment.html>