[SML] Blackout button on Gio?

[Scott Kearns Tusing]

If you go to the fader config menu (Setup > Show Setting > Fader Config)
you can pick a fader to set as a Grandmaster.

Hope this helps,
Scott

On Tue, Mar 29, 2016 at 8:56 AM, Stephen Litterst via Stagecraft <
stagecraft at theatrical.net> wrote:

> On 3/28/16 4:53 PM, cpcroteau cpcroteau via Stagecraft wrote:
>
>> Hi Everyone,
>>
>> Having some trouble building a macro that will function as a blackout
>> button on the ETC Gio.  Our current designer is a bit flustered that the
>> Gio doesn't have one, and i'm hoping someone can help me figure out the
>> syntax to build a macro to create a blackout button?  I need to leave
>> non-intensity parameters alone and just take out intensity.
>>
>
> As someone else suggested, you can build an object in the Magic Sheet that
> targets the "Blackout" console button. This works just like they physical
> button, toggling the Blackout state on then off.
>
> If the Magic Sheet is not an option, a simple macro would be "Clear_Cmd
> Select All Intens Out"  This, however, does not toggle like the blackout
> button does, you would need a second macro to release the channels --
> "Clear_Cmd Sneak Time 0 <enter>"
>
> Hope this helps,
>
> Steve L.
>
> (I'm puzzled the Gio doesn't have the physical B/O button.  I mean, even
> my Ions have that.)
>
>
> --
> Stephen Litterst            Technical Operations Supervisor
> litterst at udel.edu           Mitchell Hall
> 302/831-0601                University of Delaware
>
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>



-- 
Scott K. Tusing
www.sktusing.com
(703) 209-4422 (cell)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160329/56e995a5/attachment.html>