[SML] Chain Hoist connectors

[Joe Golden]

Switchcraft are rated to 125 V AC, while Neutrik are rated for less than 50 volts.  I also see shops using 3-pin XLR for the local pickle control, but by doing that there is no ground connection, and I doubt they're using the Shell for it.
Joe Golden
Stage-tech
951-264-8401

Please excuse typos, big fingers/tiny keyboard 


-------- Original Message --------
From: PJ Veltri via Stagecraft <stagecraft at theatrical.net>
Sent: September 20, 2016 6:13:36 PM PDT
To: Stagecraft Mailing List <stagecraft at theatrical.net>
Cc: PJ Veltri <pjveltri at gmail.com>
Subject: Re: [SML] Chain Hoist connectors

FWIW: I believe that the switch craft xlrs are rated for 120v 
PJ 

> On Sep 20, 2016, at 9:09 PM, Dave Vick via Stagecraft <stagecraft at theatrical.net> wrote:
> 
>> On Tuesday, September 20, 2016, Joe Golden <joe at stage-tech.com> wrote:
>> 
>> Dave, I hate to contradict you, but according to David Carmack of CM who teaches the hoist technician class the control voltage is 120v no matter what the supply voltage is. 
> 
> 
> I lounge corrected, but then why do so many shops use XLR connectors for control?
>  
> 
> 
> -- 
> Dave Vick
> 517-748-3859
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net


------------------------------------------------------------------------

____________________________________________________________
For list information see <http://stagecraft.theprices.net/>
Stagecraft mailing list
Stagecraft at theatrical.net
http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160920/80549538/attachment.html>