[SML] Spring Pin remove/insert tool for Coupler Clamps

[Mike Katz]

A pin Punch is the tool to remove it, and a prass or other soft face hammer
to reinsert it.
Mike

Michael Katz
narishkup at gmail.com
C: 857.383.0020

On Wed, Dec 20, 2017 at 11:58 AM, Scott C. Parker via Stagecraft <
stagecraft at theatrical.net> wrote:

> Hi All,
> Anyone know the proper tool I need to allow me to remove the spring pin in
> these clamps? And, perhaps more importantly, re-insert the pin once I've
> replaced the stripped bolt and wing nut?
> I've looked up "Rolled Pin Puller Tool" and the results are all over the
> place.
> [image: Inline image 2]
> --
> Thanks,
> Scott
>
> Scott C. Parker
> Lighting Designer http://scpld.com/ Studio 212-533-3430 <(212)%20533-3430>
>  Cell 718-757-6661 <(718)%20757-6661>
> http://twitter.com/stageseminars   https://www.linkedin.com/in/
> lightingdesigner
> USA829, IES, PLASA, USITT, ETCP certified Rigger & Electrician
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20171220/6f92da49/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_3439.JPG
Type: image/jpeg
Size: 27858 bytes
Desc: not available
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20171220/6f92da49/attachment.jpe>