[SML] QLab triggering Express via MIDI or MSC....

[Jacob Blumberg]

I did a similar thing connecting QLab and an ETC light board. I can send
you the forum for it, but it might take some  engineering on your part to
figure out the right code. Do you have the pro version on QLab?

Jacob Blumberg


On Mon, Jan 15, 2018 at 14:40 Jon Ares via Stagecraft <
stagecraft at theatrical.net> wrote:

> Howdy y'all...
>
> I'd like to have our QLab rig trigger our Express (or vice-versa) -
> and as they're in different places, it's not practical to run a long
> MIDI cable down aisles, seats, etc....
>
> We've got lots of CAT 6 in our walls.... no need or desire to run
> MIDI/MSC through a managed network, but just through the dry lines via
> ethernet cable.  Anyone do such a silly thing?
>
> Running QLab 4 on a Mac Mini, with an Edirol Firewire interface....
> Express 48/96. (Express is already running MSC to the ETC SmartFade
> ML, which runs the wiggle lights.)
>
> Thoughts?
>
> --
> Jon Ares
> www.arescreative.com
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20180115/0e21450b/attachment.html>