[SML] Long, graceful, gentle bend in conduit?

[Jonathan Zitelman]

I did this quite a while back to make some concave projection screens.  Did
essentially what Mike said, but just went against screws instead of blocks
of wood.  Due to the tight contact points we had some minor indentations,
so something to soften the bend would really help.  Definitely have to do a
tighter radius due to spring back.

-Jonathan Zitelman


On Tue, Sep 18, 2018 at 12:33 PM Jon Ares via Stagecraft <
stagecraft at theatrical.net> wrote:

> On Tue, Sep 18, 2018 at 10:04 AM Mike Katz via Stagecraft
> <stagecraft at theatrical.net> wrote:
> > I have done longbends in EMT mant times, I usually screw blocks of wood
> to a table or floor  in a slightly tighter radius than what i need as a
> finished curve and pull the conduit around be hand. I have done up to 1"
> EMT that way. I never had problems with kinking so I never had to pound
> sand as Bill suggest, but maybe I have just been lucky.
> > Mike
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20180918/3ee7a933/attachment.html>