[SML] Mounting a projector

[Stephen Rees]

My concern too. We can do better.
Steve
Stephen E. Rees, Treasurer - Revitalize Dunkirk
Professor Emeritus of Theatre
CCE-CC Master Gardener Volunteer
716.366.0505 Home
716.680.1565 Mobile



On Tue, Apr 23, 2019 at 8:51 AM Stephen Litterst via Stagecraft <
stagecraft at theatrical.net> wrote:

> On 4/23/19 8:22 AM, Stephen Rees via Stagecraft wrote:
>
> > The question is, could this projector be suspended by a C-Clamp fitted
> > in a hole bored in a 1.5" pipe cap that is threaded on to a piece of
> > pipe and then attached to the projector? The yoke bolt would be
> > lock-nutted and thread-locked to prevent loosening.
>
> My concern would be the pipe cap.  Those are usually cast iron, which
> makes them brittle and drilling a hole in it would weaken the cap.
>
> Steve L.
>
> --
> Stephen Litterst            Technical Operations Supervisor
> litterst at udel.edu           Mitchell Hall
> 302/831-0601                University of Delaware
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20190423/088c9845/attachment.html>