[SML] S4 Lens tube "back cap" STL file available

[Riter, Andrew]

I use shower caps for spare lenses, works either gel clip down or gel clip up, or on 10deg if lens down.

Andrew M. Riter  
Assistant Technical Director, Head Lighting Technician
Chan Centre 

Phone 604 822 2372
andrew.riter at ubc.ca

-----Original Message-----
From: Stagecraft <stagecraft-bounces at theatrical.net> On Behalf Of *Hobbit* via Stagecraft
Sent: Tuesday, October 20, 2020 7:31 AM
To: stagecraft at theatrical.net
Cc: *Hobbit* <hobbit at avian.org>
Subject: Re: [SML] S4 Lens tube "back cap" STL file available

[CAUTION: Non-UBC Email]

Assuming you're accomodating a typical snoot-down stored position with the gate end of the tube toward the sky and dust raining down therefrom, it
looks like a fun solution.   But for long-term quarantine-imposed storage,
wouldn't a small bit of paper and a couple of slaps of gaff do just as well for the 3D-infrastructure-less?

Hoping most folks' storage needs are *not* long-term,

_H*

____________________________________________________________
For list information see <http://stagecraft.theprices.net/>
Stagecraft mailing list
Stagecraft at theatrical.net
http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net