[SML] S4 Lens tube "back cap" STL file available

[Riter, Andrew]

Can't take too much credit for the idea.  
When I started here 18 years ago (OMG!!), Glad was making "salad savers".  Seran with an elastic rim to fit over the salad bow.  The ATD or crew at the time had invested in a dozen or so of these things (still have them, plastic lasts forever in a dark room).

The shower caps are lighter weight plastic, but cheaper, so if they wear out, I don't care.  A bag of 10 or 25 caps is at the dollar store.

Andrew M. Riter  
Assistant Technical Director, Head Lighting Technician
Chan Centre 

Phone 604 822 2372
andrew.riter at ubc.ca


-----Original Message-----
From: Stagecraft <stagecraft-bounces at theatrical.net> On Behalf Of NODEraser via Stagecraft
Sent: Tuesday, October 20, 2020 5:57 PM
To: Stagecraft Mailing List <stagecraft at theatrical.net>
Cc: NODEraser <noderaser at gmail.com>
Subject: Re: [SML] S4 Lens tube "back cap" STL file available

[CAUTION: Non-UBC Email]

On Tue, Oct 20, 2020 at 2:53 PM Riter, Andrew via Stagecraft <stagecraft at theatrical.net> wrote:
>
> I use shower caps for spare lenses, works either gel clip down or gel clip up, or on 10deg if lens down.
>

Wish I had thought of that, I just replaced a bunch of smoke detectors and they all came with little "shower caps", presumably to shield them when painting.


[Greg Bennett]
-Independent Carpenter, Electrician & Lighting Designer -Purveyor of Classic Apple & Macintosh Gear http://www.hsiprodsvcs.com/ http://www.macshack.us/

____________________________________________________________
For list information see <http://stagecraft.theprices.net/>
Stagecraft mailing list
Stagecraft at theatrical.net
http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net