[SML] Air Brakes/Casters

[Kenneth Zinkl]

I haven't built one of these systems for many years but I don't recall
using a filter. The air from the compressor was filtered before going into
the tank on the scenery and the air needs on the scenery were so low that I
don't recall seeing moisture in any of the lines or cylinders ever.

Ken

On Fri, Jan 26, 2024 at 9:34 AM Rick Clever via Stagecraft <
stagecraft at theatrical.net> wrote:

> Hello Stagecrafters,
>
> I have finally had a chance to play with pneumatic caster mechanisms
> and am starting to put together a system. I have noticed that in a lot
> of the pictures I have seen the air tanks only have a regulator and no
> filter. Is this standard? Should I have a filter inline to keep
> moisture out of the lines or are these for such short term use,
> moisture is not an issue?
>
> --
> Rick Clever
> Technical Director
> Owens Community College
> 567-661-7930
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20240126/435369c6/attachment.html>