[SML] Sequential triggering of solenoids with one input

[Jerry Durand]

you can also have the ratchet assembly mechanically release each knife.  
3D print a cam and ratchet, some levers, and you should be good to go.

Several cam shapes can be used.

On 01-Jul-25 17:06, Joe via Stagecraft wrote:
> Doing a little more research, and see that these types of switches 
> were used in mechanical telephone systems to route calls that were 
> made using the rotary pulse dials.  I can find them online, but they 
> seem to be somewhat pricey at around $80, and I would be concerned 
> about their functionality.
>
> -Joe
>
> ____________________________________________________________
> For list information see<http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20250701/6c999b6d/attachment.html>