[SML] Sequential triggering of solenoids with one input

[Sean McCarthy]

Is the problem a limitation of available DMX addresses on the console?

On Tue, Jul 1, 2025 at 10:16 AM Jerry Durand via Stagecraft <
stagecraft at theatrical.net> wrote:

> you can also have the ratchet assembly mechanically release each knife.
> 3D print a cam and ratchet, some levers, and you should be good to go.
>
> Several cam shapes can be used.
>
> On 01-Jul-25 17:06, Joe via Stagecraft wrote:
>
> Doing a little more research, and see that these types of switches were
> used in mechanical telephone systems to route calls that were made using
> the rotary pulse dials.  I can find them online, but they seem to be
> somewhat pricey at around $80, and I would be concerned about their
> functionality.
>
> -Joe
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/> <http://stagecraft.theprices.net/>
> Stagecraft mailing listStagecraft at theatrical.nethttp://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20250701/c661630c/attachment.html>