[SML] Ion / ultratec radiance hazer

[Jeffrey E. Salzberg]

Check your "dimmer" curve.

> All,
>
>        We've just acquired an Ion, (upgrade from a 48/96 express) This 
> is our first time using a ultratec radiance hazer with the new board. 
> We can't seem to get the output to drop to zero. The address is set to 
> 001 , so I'm not in manual mode. The valid dmx led is illuminated. 
> Another device daisy chained off of this one is working fine, so I'm 
> reasonably sure the DMX node is working fine. We tried swapping 
> machines from the rental house to see if something was wrong with the 
> unit. The hazer does respond when the board calls for haze and fan 
> speed. But the haze output won't drop to zero when the channels are 
> set to zero. This isn't just a 5 minute lag, either, it will keep 
> putting out continuously if we don't turn cut power to the unit.
>
> Any help appreciated.



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20160901/cb8c645d/attachment.html>