[SML] Ion / ultratec radiance hazer

[Lynnjos]

Are you taking the haze and fan to zero or just the intensity channel?  Or are you running it as separate channels the way you would on the express?
Lynn

Sent from my iPhone

> On Sep 1, 2016, at 6:36 PM, Matthew Whiton via Stagecraft <stagecraft at theatrical.net> wrote:
> 
> All, 
> 
>        We've just acquired an Ion, (upgrade from a 48/96 express) This is our first time using a ultratec radiance hazer with the new board. We can't seem to get the output to drop to zero. The address is set to 001 , so I'm not in manual mode. The valid dmx led is illuminated. Another device daisy chained off of this one is working fine, so I'm reasonably sure the DMX node is working fine. We tried swapping machines from the rental house to see if something was wrong with the unit. The hazer does respond when the board calls for haze and fan speed. But the haze output won't drop to zero when the channels are set to zero. This isn't just a 5 minute lag, either, it will keep putting out continuously if we don't turn cut power to the unit. 
> 
> Any help appreciated. 
> 
> Thanks 
> 
> Matt  
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net