[SML] Jac-Pac Issue

[Mt. Angel Performing Arts Center]

I just looked at ours and verified there is only an O-Ring on the 
cylinder, nothing inside the regulator.

These things seem to a bit finicky about correctly sized O-Rings.

Hope that helps -

Carla

" I try to avoid social media at all costs as it has become apparent 
recently that each post or tweet seems to subtract a few tenths of a 
point from the poster's IQ and I really can't spare any more" - Stu 
Rasmussen

On 6/2/2018 2:48 PM, Paul Guncheon via Stagecraft wrote:
> Anyone own the Jac-Pac CO2 device that uses paintball tanks to provide 
> convenient air supply for pneumatic tools. I need to know if there is an 
> O-ring in the regulator/tank connector. I have tried contacting the 
> manufacturer without success. I have the yellow older model and it's 
> leaking air around the threads which the troubleshooting guide says is 
> caused by a bad O-ring on the cylinder. The O-rings on my cylinders look 
> good, but I saw the remnants of one in the connector and I don't know 
> where it came from.
> 
> Muchas Mahalos.
> 
> Laters,
> 
> Paul 1
> 
> 
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>