[SML] Batten Clamps Question

[Lon Butcher]

Thanks Bill,

That's exactly what I was looking for!

Cheers,
Lon

On Fri, Mar 30, 2018 at 3:55 PM, Bill Sapsis via Stagecraft
<stagecraft at theatrical.net> wrote:
> The second hole on the batten clamp is to suspended something from the batten clamp.
> One bolt above the batten and one bolt below.
> Shackle, bolt, rapid link...whatever...(as long as it has an appropriate load rating) goes in the bottom hole to hang the track.
>
> Zat help?
>
> Bill S
>
> bill at sapsis-rigging.com
> http://sapsis-rigging.com
> +1.267.278.4561 mobile
> On 3/30/18, 3:36 PM, "Stagecraft on behalf of Lon Butcher via Stagecraft" <stagecraft-bounces at theatrical.net on behalf of stagecraft at theatrical.net> wrote:
>
>     Hello to "The List",
>
>     For batten clamps that hold up traveler track.  Is there a right and
>     wrong between using two bolts on the track side, or two bolts above
>     the batten?
>
>     Thanks,
>     Lon
>
>     --
>     Lon Butcher
>     "Tinkerer at large"
>     Portland, Maine
>
>     ____________________________________________________________
>     For list information see <http://stagecraft.theprices.net/>
>     Stagecraft mailing list
>     Stagecraft at theatrical.net
>     http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net
>
>
> ____________________________________________________________
> For list information see <http://stagecraft.theprices.net/>
> Stagecraft mailing list
> Stagecraft at theatrical.net
> http://theatrical.net/mailman/listinfo/stagecraft_theatrical.net



-- 
Lon Butcher
"Tinkerer at large"
Portland, Maine