[SML] Batten Clamps Question

[Dave Vick]

On Fri, Mar 30, 2018 at 3:55 PM Bill Sapsis via Stagecraft <
stagecraft at theatrical.net> wrote:

The second hole on the batten clamp is to suspended something from the
> batten clamp.
> One bolt above the batten and one bolt below.
> Shackle, bolt, rapid link...whatever...(as long as it has an appropriate
> load rating) goes in the bottom hole to hang the track.



Note also that you do not split the two halves of the track hanger with the
tail of the barren clamp, nor do you split the two halves of the batten
clamp with the tail of the track hanger; the two clamp assemblies should
bolt side-by-side, not married.

HTH, HAND, &c...
-- 
Dave Vick
517-749-3859
Sent from my #%!^¥? iPhone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://theatrical.net/pipermail/stagecraft_theatrical.net/attachments/20180330/089b210d/attachment.html>